3 6 6 C
A N Y O N
8–17
5. Close the discharge seacock when the tank is empty.
Deck Pump-out
1. Remove the cap from the deck pump-out fitting located on the port gunwale.
2. Connect a vacuum hose from a pump-out station to the deck fitting and run until the tank is
empty. Replace the cap on the deck pump-out fitting.
See
“Vacuflush Head Layout” on page 8–26
for a layout diagram.
Raw Water Washdown Operation
To operate the raw water washdown, open the seacock with the washdown I.D. tag located
beneath the lid in the sole floor. Depress the washdown switch on the helm switch panel. This
system will now be pressurized at the “raw water” washdown outlet. This faucet may be used
alone or with a hose. A hose with a spray nozzle attached may be used intermittently without
turning the switch off in the same fashion as a home yard hose with a nozzle. The raw water
washdown pump has an internal pressurization switch that will maintain water pressure as
needed until the switch is turned off at the switch panel. The pump is located on the bulkhead
in the rigging area behind the storage compartment under the helm, and is accessed through
the aft wall panel in the storage compartment. See
“Livewell/Raw Water Washdown System
Layout” on page 8–25
for a system diagram.
C A U T I O N
Overboard discharge seacock must be sealed and secured in the closed position in accordance
with the laws in your boating area.
!
Summary of Contents for CANYON 366
