Graco XP 26C051, Instructions - Parts Manual

Page: 5 / 34

Overview
3A5314B 5
Overview
Component Requirements
These kits do not include the Viscon HP heater or
Xtreme-Wrap Water Heated Hose. Order these
separately.
• Refer to Viscon HP heater manual 309524 for listing
of hazardous-location approved models.
• Refer to Xtreme-Wrap Water-Heated Hose manual
3A5313 for hose part numbers.
Usage
Use only hazardous-location approved components.
Kit Applications
26C051 - Hose Heat Circulation Retrofit Kit
This kit provides the pump assembly, heater mounting
components and tubing/fittings to connect to a heated
hose only. Order 26C078 if circulation is needed
through a 20 gallon (75 liter) hopper for additional
components.
26C078 - Hopper Heat Circulation Retrofit Kit
This kit provides additional fittings and tubing required to
circulate through two 20 gallon (75 liter) hoppers, with or
without a heated hose.
Heated Hose Assembly
Separately order a heated hose assembly that meets
maximum pressure and hose diameter requirements.
You can connect up to six 50 ft (15.2 m) heated hose
sections for a maximum total length of 300 ft (91.4 m).
See manual 3A5313.
Using components on the system, not approved for
hazardous locations or explosive atmospheres may
result in a fire or explosion hazard.
The circulation kit is not approved for use in hazardous
locations unless all wiring meets local, state, and
national codes.
See the XP or XP-hf system manual for approved
heater wiring.