13
Testing the System
It is VERY IMPORTANT to test the system
when first set up, and at regular times
thereafter.
Test the units if you suspect they
may have been damaged or have not been
used for a long time.
1. If two adults are present, have one take the
Parent Units to different locations, trying
various volume settings, while the
other speaks into the Nursery Unit.
2. If only one adult is available, place a ticking
clock, radio, or other sound-producing device
near the Nursery Unit to test it.
3. When testing, keep the level of your child’s
sounds in mind, and adjust the volume
accordingly.
4. If there is sound interference, switch the
Nursery Unit and the Parent Units to the other
channel setting.
Setting Up
the Baby Monitor
1. For optimum operation, it is best to use new
batteries in the Parent Unit.
2. Place the Nursery Unit within 10 feet
(3 meters) of your baby. Plug an AC adapter
into the jack on the side of the Nursery Unit.
Plug adapter into a working 120 volt AC outlet.
3. Aim the Nursery Unit toward your baby.
Check that there are no walls or large objects
that could block sound transmission.
4. Set both the Nursery Unit and the Parent
Unit to the same channel, “A” or “B” (“X” or “Y”).
5. Turn on the Nursery Unit using the on/
off switch on the side. The green power light
should come on.
6. Place the Parent Unit within five (5) feet (1.5
meters) of the Nursery Unit and turn on the
Parent Unit using the ON/OFF switch on the
side of the unit. The green power light should
come on.
7. Repeat same set-up procedure for second
Parent Unit.
8. Your monitor is now ready for use.
Summary of Contents for Ultra Clear vibe
Page 15: ...15 Notes...
