20
308718
Removing and Reinstalling Compressor
WARNING
HOT SURFACE HAZARD
Be sure the compressor duct work is
cool before removing it. If the sprayer
was operated recently, it will be very hot
and can cause burns.
NOTE: Clean the cooler whenever the compressor is
serviced.
Removing Compressor
1.
Relieve the pressure.
See Pressure Relief
Procedure on page 5.
2.
Remove the hopper.
See Fig. 18
3.
Remove the pump foot screws on one end of the
pump (35), and loosen the foot screws on the
other end of the pump. Move the pump out of the
way.
4.
Remove the filter cover (20).
5.
Remove the two screws (7) and the shroud (18a).
Remove and clean the air filter (K).
6.
Remove the compressor guard (16).
7.
Remove grounding screw (36) and the two leads
(U) from the bottom of the switch (9).
Fig. 18
K
18
16
35
20
pump foot screws
7
18a
7
6
36
U
9
