Pressure Relief Procedure
3A6746B
5
Flush the Equipment
(Solvent-Based Materials)
•
Flush before changing materials, before fluid can
dry or cure in the equipment, at the end of the day,
before storing, and before repairing equipment.
•
Flush with a fluid that is compatible with the fluid
being dispensed and the equipment wetted parts.
•
Flush at the lowest pressure possible. Check con-
nectors for leaks and tighten as necessary.
•
Do not leave the gun or any parts in water or clean-
ing solvents.
1. Follow
2. Remove nozzle or disk by loosening retaining ring
(3).
3. Remove air control valve (12) and clean all residue
from air passages.
4. Hold a metal part of the gun firmly to a grounded
metal pail. Trigger the gun until clean solvent
dispenses.
5. Store in a dry location.
To avoid fire and explosion, always ground equipment
and waste container. To avoid static sparking and
injury from splashing, always flush at the lowest
possible pressure.
