![background image](http://html1.mh-extra.com/html/graco/snugride-classic-connect-35/snugride-classic-connect-35_owners-manual_2250862016.webp)
16
4.1 Adjusting Handle
4.2 Removing and Attaching Infant Restraint
To remove, squeeze release handle at back of
infant restraint and lift out of base as shown
.
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.
1. Press handle adjustment buttons on both
sides of handle
.
2. Rotate handle until it clicks into any of the
4 positions:
Position
A: MUST be used
when carrying by handle,
Position
A,B,C,D: may be used in vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place
.
3. Push and pull on the handle
to be sure it is locked firmly in
position.
Carrying
Sitting
A
B
C
D