2-QUART PRESSURE CUP
2
311417C
SET-UP FOR SPRAYING
1.
Connect air hose to air inlet of gun and to air outlet on cup regulator as shown.
2.
Connect fluid hose to fluid inlet of gun and to cup fluid outlet as shown.
3.
Connect handle to top of cup as shown.
4.
It is best for the air supply line to pass through a SHARPE Air Control Unit to filter dirt from the air and extract water
and oil. Connect the air supply hose to the air inlet fitting on cup regulator.
Note: Follow the manufacturer’s directions for the mixing and preparation of material. Strain material using a fine mesh
screen in order to prevent the entry of foreign matter and the clogging of fluid passageways.
•
Air pressure in the cup never to exceed 50 PSI.
•
Never tamper with the relief valve. The relief valve limits the maximum air pressure entering the cup. If the relief
valve does not work properly, over-pressurization may occur and cause the cup to rupture or explode.
•
Always disconnect cup assembly from air supply and release pressure in cup (open release valve counter-
clockwise) before installing or removing the canister from the lid assembly.
Pressure Spray Gun
Model 7004
2-Quart Pressure Cup
Air Adjusting Valve (Optional)
Fluid
Hose
Air Supply Hose
Air Control Unit
Air Compressor
Gun Air Inlet
Air Hose
Gun
Fluid
Inlet
