Installation
3A8626A
13
2. To reposition the roller guide arm (a) to a position
other than Shipping Position AA or EE:
a. Secure the reel to a solid surface with
C-clamps (C) (F
. 9).
b. Attach a C-clamp (D) to the reel flange to
prevent the reel from unintentionally becoming
unlatched and spinning freely (F
. 9).
c. Remove the nuts (b) from each side and rotate
arm (a) to the desired position.
NOTE: SD Model Reels have four (4) nuts, and XD
Model Reels have eight (8) nuts (four on each side).
d. Check the pawl to make sure it is not wedged
. 10).
e. Replace and tighten nuts to secure the arm
(torque 25 - 35 ft-lb/33.9 - 47.5 N•m).
F
IG
. 9
D
a
b
C
C
F
IG
. 10
Correct
Incorrect
