13
FRONT VIEW
Handle
Vehicle
belt
hook
Handle
adjustment
button
Harness
buckle tongues
4.0 Features and Components
Harness
slots
Harness
clip
Harness
buckle
Harness
adjustment
button
Harness
adjustment
strap
Harness
Strap
Handle
adjustment
button
Waist
slots
14
Canopy
Harness
slot
Release handle
Level
indicator*
Owner’s
manual
Metal
junction
plate
Locking clip
storage**
**Locking
Clip
*Level
Indicator
Harness
storage for a
smaller child
The level indicator is attached to the side of
the infant restraint and indicates whether or
not the infant restraint is properly reclined.
The locking clip is stored on the bottom of
the infant restraint. You will need to use it
with certain types of vehicle seat belts.
REAR VIEW
Harness adjustment
strap
Anchor
Clip
15
Vehicle belt/LATCH path
Knob for
Adjustable Foot
LATCH
Connector
LATCH
Storage
Bars
(underneath)
Lock-off
United States Federal Motor Vehicle Safety Standards have defined a
new system for installing car seats in vehicles. The system is called
LATCH
.
* LATCH may be used IN PLACE of vehicle belt ONLY if vehicle is
equipped with LATCH anchor points. Please refer to vehicle owner’s
manual for LATCH locations.
BASE
Adjustable Foot
LATCH
Adjustment
Belt
4.2 Removing and Attaching Infant Restraint
4.1 Adjusting Handle
To remove, squeeze release handle at back of
infant restraint and lift out of base as shown .
To put infant restraint in base, push infant
restraint down until it clicks into base.
Pull up
on infant restraint to be sure it is latched
firmly into base.
1. Press handle adjustment buttons on both
sides of handle .
2. Rotate handle until it clicks into any of the
4 positions:
Position
A: MUST
be used
when carrying by handle,
Position
B,C:
are convenience
positions,
Position
D:
is the sitting position,
NEVER
use position
B
in
the vehicle.
BOTH
handle adjustment
buttons must pop out to lock
handle in place .
3.
Push and pull on the handle to
be sure it is locked firmly in
position.
Carrying
Sitting
A
B
C
16
D
Page 4 of 11 Graco Safe Seat Infant (7/05)
