background image

41

1.

For ease of storing, extend 

LATCH

to its maximum length.

2.

Locate the storage bars on 
bottom of infant restraint base  .

3.

Fasten connector (without 
adjustment belt) onto storage bar.

4.

Repeat step 3 for connector with 
adjustment belt. After fastening 
onto storage bar, pull on 
adjustment belt to make sure 

LATCH

is securely fastened.

5.

LATCH

storage should look 

like this when complete  .

8.1 Airplane Use

Install in an airplane the same way as 
in an automobile with a lap only belt. Notify
the airline ahead of time that you intend to
bring the seat on board.

Use only in forward-facing aircraft seat. Follow the flight 
attendants instructions about infant restraint placement. 
Do not use this infant restraint if the airplane seat belt does 
not hold the infant restraint securely.

8.0 Ad

ditional Inf

ormation

Storage bars

8.2 Storing LATCH

Underside of base

8.3 Cleaning and Maintenance 

!

TO REMOVE AND WASH

INFANT RESTRAINT PAD,

follow instructions in 

“5.1

Positioning Harness Straps”

,

pages. 20-23 to remove the 
harness straps from the metal
junction plate. Push aside the
small tab that holds the anchor
clips in place 

and pull the

anchor clips out of their 
indentations. Remove the
anchor clips from the harness 
straps and push straps through 
seat slots  . 

Once seat pad has been removed put anchor 
clips back on the harness straps so they do 
not get misplaced.

Carefully remove the seat pad. Machine wash on 
delicate cycle and drip-dry. DO NOT USE BLEACH. 

Reverse steps to reinstall seat pad. 

Check

that harness 

system is not twisted, and pull on harness system to be 
sure harness is securely reinstalled.

42

43

!

INFANT RESTRAINT METAL AND PLASTIC PARTS

may be cleaned

by wiping with a mild soap and water solution. DO NOT USE BLEACH
OR DETERGENT which may weaken plastic parts.

!

HARNESS STRAPS

may be spot cleaned or replaced. DO NOT

IMMERSE THE HARNESS STRAPS IN WATER. Doing so may weaken 
the harness straps. NEVER iron the harness straps.

!

IF 

HARNESS STRAPS 

have cuts, fraying or become badly twisted, you

must replace the straps.

!

BUCKLE

may be cleaned with a damp cloth.

!

DO NOT LUBRICATE

the buckle.

!

DO NOT USE INFANT RESTRAINT 

without seat pad.

!

CONTINUOUS USE OF INFANT RESTRAINT MAY CAUSE 

DAMAGE TO VEHICLE SEAT.

Use an infant restraint mat, towel 

or thin blanket to protect upholstery.

!

NEVER USE A SECOND-HAND INFANT RESTRAINT AND BASE

or an infant restraint whose history you do not know.

To purchase parts or accessories or for warranty 

information in the United States,

please contact us at the following:

www.gracobaby.com

or

1-800-345-4109

Replacement P

ar

ts

44

Page 11 of 11  Graco  Safe Seat Infant  (7/05)

Summary of Contents for Safe seat












Reviews: