Graco ROTOFLEX 309793 A User Manual Download Page 3

Page: 3 / 4

RotoFlex Pump Repair Kit

309793 A

Reassembly

Reinstall RotoFlex Pump hose on plate.

Kink hose as shown,
making sure dots
located on hose fitting
face each other.

Slide hose onto plate
as shown below, mak-
ing sure plate slides
into slot between hex
fitting on end of hose.

Align dots located on hose fitting, making sure they
are facing each other at all times to ensure the hose
does not twist during reinstallation.

Reposition plate, aligning hex fittings with enclosure
openings.

Remove wood block support under motor.

Tighten bolt. As bolt is tightened the plate will snug
back into place.

Replace shroud (6 bolts).

Replace hopper.

Break in new pump by running dry or with warm
water for 3-5 minutes.

ti3127a

DOTS

ti3125a

ti3084a

Summary of Contents for ROTOFLEX 309793 A

Page 1: ...can splash in the eyes or on skin and cause serious injury Follow Pressure Relief Procedure when you stop spraying and before cleaning checking or servicing Wear protective clothing gloves and eyewear...

Page 2: ...and then lift ing hopper straight up off unit 5 Remove material hose 6 Loosen bolt A located between air and material hose outlets Unscrew bolt to lower plate leaving about 4 5 threads on bolt DO NOT...

Page 3: ...hose 3 Align dots located on hose fitting making sure they are facing each other at all times to ensure the hose does not twist during reinstallation 4 Reposition plate aligning hex fittings with encl...

Page 4: ...n this document reflects the latest product information available at the time of publication Graco reserves the right to make changes at any time without notice Sales Offices Minneapolis Detroit Inter...