background image

   

Rev 02 

PN: 95358 

Page | 41  

 

Terms, Conditions & Warranty 

 

Five Year Warranty

 

This limited warranty is in lieu of and excludes all other representations made by advertisements, distributors, agents, or manufacturers sales 
representatives, and all other warranties, both express and implied. There are no implied warranties of merchantability or of fitness for a 
particular purpose for goods covered hereunder. 
QED Environmental Systems warrants to the purchaser of its products that, subject to the limitations and conditions provided within the Terms & 
Conditions of Sale, products, materials and/or workmanship shall reasonably conform to descriptions of the products and shall be free of defects 
in material and workmanship.  This warranty applies only 

when the product is installed, operated, and maintained in accordance with QED’s 

written recommendations. 
All warranty durations are calculated from the original date of purchase

determined as beginning the date of shipment from QED facilities and 

the date QED is notified of a warranty claim. This warranty shall be limited to the duration and conditions set forth below. 

1. 

AP4+, AP4.5 Auto Pumps - 

Warranted for five (5) years: 100% material and 100% workmanship. This limited warranty coverage only applies 

to long and short AP4+, AP4.5 Pumps purchased with this warranty. There will be no warranty for application or material compatibility. The 
materials used in pumps vary depending upon application and the customer is responsible for knowing the environment in which the pump will 
be operating and working with QED to determine what materials of construction will be best for the application. 
The warranty is valid when the following conditions exist: when the site has a pH between 2 and 12, has a salinity of 9,000ppm or less, is between 
40 and 180 degrees Fahrenheit (250 degrees F for high temperature pumps), is noncorrosive to the construction materials of the pump, and is not 
abrasive. Typical commercial fuels are acceptable materials in free and dissolved phase. The pumps and accessories must be operated within the 
specifications and limits given in the manual for the particular piece of equipment. 

2. 

Hose, Tubing, Fittings, And Air Filtration Housings - 

Warranted for one (1) year: 100% material and 100% workmanship. There will be no 

warranty for application or material compatibility. The materials used vary depending upon application and the customer is responsible for 
knowing the environment in which the equipment will be operating and working with QED to determine what materials of construction will be 
best for the application. 

3. 

Wellheads, Well Caps, Flow Meters, Pneumatic Data Modules - 

Warranted for one (1) year: 100% material and 100% workmanship. 

4. 

Precision Fine Tune Control Valves - 

Warranted for two (2) years: 100% material and 100% workmanship. 

5. 

Parts and Repairs - 

Warranted for ninety (90) days: 100% material and 100% workmanship; when repairs are performed by QED or its 

appointed agent; from date of repair or for the full term of the original warranty, whichever is longer. Separately sold parts are warranted for 
ninety (90) days: 100% materials and 100% workmanship. 
Defects in any equipment that result from abuse, operation in any manner outside the recommended procedures, use and applications other 
than for intended use or exposure to physical environments beyond the designated limits of materials and construction, will void the warranty. 
Chemical attack by liquids, gases or abrasive substances contacting equipment and accessories shall not be covered by this warranty. A range of 
materials of construction is available from QED and it is the buyer's responsibility to select materials of construction to fit buyer's application. 
QED will only warrant that the supplied materials will conform to published QED specifications and generally accepted standards for that 
particular material. 
 
QED Environmental Systems shall be released from all obligations under all warranties if any product covered hereby is modified by persons other 
than QED service personnel (unless such modification by others is made with the written consent of QED); resold to other parties; and/or moved 
to or used on a site other than originally specified. 
It is understood and agreed that QED Environmental Systems shall in no event be liable for incidental or consequential damages resulting from its 
breach of any of the terms of this agreement, nor for special damages, nor for improper selection of any product described or referred to for a 
particular application. Liability under this warranty is limited to repair or replacement F.O.B. QED's factory, or its appointed agent's shop, of any 
parts which prove to be defective within the duration and conditions set forth herein, or repayment of the purchase price at the option of QED, 
provided the products have been returned in accordance with the duration and conditions set forth herein. 

Subassemblies and Other Equipment Manufactured by Others

 

The foregoing warranty does not apply to major subassemblies and other equipment, accessories, and other parts manufactured by others, and 
such other parts, accessories, and equipment are subject only to the warranties, if any, supplied by their respective manufacturers. QED makes 
no warranty concerning products or accessories not manufactured by QED. In the event of failure of any such product or accessory, QED will give 
reasonable assistance to Buyer in obtaining from the respective manufacturer whatever adjustment is reasonable in light of the manufacturer's 
own warranty. 
 

Illustrations and Drawings

 

Reasonable effort has been made to have all illustrations and drawings accurately represent the product(s) as it actually was at the time of doing 
the illustrations and drawings. However, products may change to meet user requirement and therefore may not be reflected in the literature. In 
addition, literature may be updated to reflect the most recent equipment revision(s). Changes to either or both equipment and/or literature can 
be made without notice. 

Buyer's Remedies

 

The buyer's exclusive and sole remedy on account of or in respect to the furnishing of defective material or workmanship shall be to secure 
replacement thereof as aforesaid. QED shall not in any event be liable for the cost of any labor expended on any such product or material or for 
any special, direct, indirect or consequential damages to any one by reason of the fact that it shall have been deemed defective or a breach of 
said warranty. 

Changes without Notice

 

Summary of Contents for QED AutoPump AP4













































Reviews: