background image

Installation

3A5573C

3

Assemble the Oil Bar

The oil bar requires assembly prior to use.

1.

Attach dispenser wrapper (21) to drain 
pan (22) using screws (27), lock 
washers(28) and nuts (29) and existing 
holes. Tighten nuts securely. (See F

IG

5).

2.

Use the existing mounting holes in the 
back of the oil bar to secure it to a wall. 
Select a location that is easily accessible 
to the user and will adequately support 
the weight of the oil bar, metered 
dispense valves and plumbing. 

NOTE:

 Fasteners for this installation are 

not included in the kit and must be 
provided by the user. When selecting 
fasteners consider the weight of the oil 
bar, metered dispense valves, plumbing 
fixtures and dispensed oil in the 
container placed on the shelf. See 
Technical Specifications, page 10.

3.

Attach the meter mounting plate (24) to 
the wrapper dispenser (21) using screws 
(27), lock washers(28) and nuts (29) and 
existing holes. Tighten nuts securely. 
Refer to F

IG

. 6 for the correct installation 

orientation for these parts.

4.

Connect cover panel plate (25) to meter 
mounting plate (24) using screws (27) 
and existing holes. Tighten screws 
securely. Refer to F

IG

. 7 for the correct 

installation orientation for these parts. 

NOTE:

 Do not assemble cover panel 

plate (25) prior to meter installation.

5.

Install pan strainer (23) in drain pan (22).

F

IG

. 5

27

22

28

29

21

F

IG

. 6

F

IG

. 7

24

21

28, 29

27

25

27

24

Summary of Contents for Pulse 25D121













Reviews: