Graco ProMix PD2K, Operation

Page: 18 / 116

Pre-Operation Tasks
Initial Initial
Initial System
System
System Setup
Setup
Setup
1. Change optional setup selections to
desired parameters, as described in
Setup Mode Screens, page 68 .
2. Set recipe and flush information as
described in
Recipe Screen, page 76 ,
and Flush Screen, page 79 .
Flush Flush Flush Before Before Before Using Using Using Equipment Equipment Equipment
The pump fluid section was tested with lightweight
oil, which is left in the fluid passages to protect parts.
To avoid contaminating your fluid with oil, flush the
equipment with a compatible solvent before using
the equipment.
Valve Valve
Valve Settings
Settings
Settings
Dose valves and purge valves are factory set with the
hex nut (E) 1-1/4 turns out from fully closed.
Figure 10 Valve Adjustment
18 3A4486D