Graco PD269300A, Instruction Manual

Page: 16 / 96

16
FORWARD-FACING INSTALLATION WITH LATCH
1
7
6
5
4
3
2
LATCH belt must be routed through
opening in child restraint for forward-facing
SEEPAGE fig. e
Belt must lay flat and not be twisted.
Adjust car seat to upright position (see fig. a
ANDPAGE fig. g 3ECURERECLINE
STANDINTO5PRIGHT0OSITIONBYPUSHINGTABS
INTOLOCKPOSITION
Place forward-facing ONVEHICLESEATEQUIPPED
with LATCH anchors.
&OREASEOFINSTALLATIONEXTEND
LATCH belt
TOITSMAXIMUMLENGTH
(OOKCONNECTORSTOVEHICLELOWERANCHORS
(fig. b) . Pull connectors to be sure they are
securely attached (fig. c) .
3LIDECHILDRESTRAINTBACKUNTILTHECHILDRESTRAINT
ISINCONTACTWITHTHEVEHICLESEATBACK
0RESSDOWNlRMLYINCENTEROFCHILDRESTRAINTTO
COMPRESSVEHICLESEATCUSHIONWHILETIGHTENING
LATCH belt by pulling adjustment belt.
5SEYOURKNEETOPRESSDOWNINCENTEROF
child restraint (fig. d) .
0ULLFRONTTOBACKANDLEFTTORIGHTATBELTPATH
TOCHECKFORSECUREINSTALLATION
(fig. e)
4HE
CHILDRESTRAINTSHOULDNOTMOVESIDETOSIDEOR
FORWARDMORETHANINCHCM
#HECKTHATTHELOWERANCHORAGEBELTSTAYS
tight and does not slip from the tightened
position. If it does not stay tight, try another
SEATINGPOSITIONORCONTACT#USTOMER3ERVICE
!TTACHTETHERSTRAPHOOK
(A) to anchor
hardware (B) and tighten adjustment belt to
REMOVEANYSLACK (fig. f) .
Belt must lay flat and not be twisted.
0ERFORMTHISTESTEVERYTIMEYOUDRIVEWITHYOUR
child.
8
NOTE:
3OMEVEHICLEMANUFACTURERSHAVELOWER
MAXIMUMWEIGHTRATINGSFOR LATCH anchors,
SOYOUMUSTCONSULTYOURVEHICLEOWNERS
MANUALORCALLTHEVEHICLEMANUFACTURERTO
CONlRMTHELIMITSONYOURVEHICLES
LATCH
anchors.