Graco Optimiser 02017, Instructions Manual

Page: 5 / 32

308–293 5
Selection Charts
CHART 1: GUN ASSEMBLIES, Series B (continued)
Optional Non-HVLP Compliant Gun Assemblies
With standard needle and nozzle and optional high pressure air cap
Includes:
Optional
Complete
Gun Assy.
Part No.
Needle
Assy.
P/N
*
Nozzle
P/N
{
High
Pressure
Air Cap
P/N Orifice Size
Material Usage
(See TERMS on page 4)
236–023 238–217 276–293 189–755 0.042” (1.067 mm) Light to Medium Fluids or Low Fluid Flow
[5–8 oz./min. (0.15–0.24 l/min.)]
236–024 238–218 276–294 189–755 0.055” (1.397 mm) Light to Medium Fluids or Medium Fluid
Flow [6–12 oz./min. (0.18–0.36 l/min.)]
* Maximum recommended torque to install molded fluid nozzle in the spray gun is 35 in-lbs (4 N
S
m).
{
See atomizing air pressure chart on page 7.
CHART 2: NEEDLE/NOZZLE/AIR CAP KITS
Standard Needle/Nozzle/Air Cap Kits
Standard
Includes:
Standard
Needle/
Nozzle/Air
Cap Kit
Part No.
{
Needle
Assy.
P/N
*
Nozzle
P/N
Air Cap
P/N Orifice Size
238–233 238–217 276–293 188–754 0.042” (1.067 mm)
238–234 238–218 276–294 188–754 0.055” (1.397 mm)
238–235 238–219 276–295 188–755 0.070” (1.778 mm)
238–236 238–220 276–296 188–756 0.086” (2.184 mm)
{
See page 6 for needle assembly replacement tips.
Optional Needle/Nozzle/Air Cap Kits – available as “Build to Order”
Optional
Needle/
Includes:
Needle/
Nozzle/Air
Cap Kit
Part No.
{
Needle
Assy.
P/N
*
Nozzle
P/N
Air Cap
P/N Orifice Size
235–306 238–703 276–290 188–754 0.020” (0.508 mm)
235–307 238–703 276–291 188–754 0.026” (0.660 mm)
235–308 238–703 276–292 188–754 0.030” (0.762 mm)
* Maximum recommended torque to install molded fluid nozzle in the spray gun is 35 in-lbs (4 N
S
m).
{
See page 6 for needle assembly replacement tips.