Graco Optimiser 02017, Instructions Manual

Page: 4 / 32

4 308–293
Selection Charts
TERMS:
Light Fluid: Up to 18 seconds with No. 2 Zahn cup (20 centipoise)
Medium Fluid: 19 to 28 seconds with No. 2 Zahn cup (20–64 centipoise)
Heavy Fluid: Greater than 28 seconds with No. 2 Zahn cup (greater than 64 centipoise) --
2.8 Volatile Organic Compounds, High-solid Polyurethanes, Heavy Waterborne Enamels
P/N: Part number
NOTE: See page 6 for additional tips on selecting the needle/nozzle/air cap set best suited to your application.
CHART 1: GUN ASSEMBLIES, Series B
Standard Gun Assemblies
With standard needle/nozzle/air cap kit
Includes:
Standard
Complete
Gun Assy.
Part No.
Standard
Needle/
Nozzle/Air
Cap Kit P/N Orifice Size
Material Usage
(See TERMS above)
236–013 238–233 0.042” (1.067 mm) Light to Medium Fluids or Low Fluid Flow
[5–8 oz./min. (0.15–0.24 l/min.)]
236–014 238–234 0.055” (1.397 mm) Light to Medium Fluids or Medium Fluid
Flow [6–12 oz./min. (0.18–0.36 l/min.)]
236–015 238–235 0.070” (1.778 mm) Medium to Heavy Fluids or Medium Fluid
Flow [6–12 oz./min. (0.18–0.36 l/min.)]
236–016 238–236 0.086” (2.184 mm) Heavy Fluids or High Fluid Flow
[10–15 oz./min. (0.3–0.45 l/min.)]
Optional Gun Assemblies – available as “Build to Order”
With optional needle/nozzle/air cap kit
Includes:
Optional
Complete
Gun Assy.
Part No.
Optional
Needle/
Nozzle/Air
Cap Kit P/N Orifice Size
Material Usage
(See TERMS above)
236–020 238–230 0.020” (0.508 mm) Light Fluids or Low Fluid Flow
[3–6 oz./min. (0.09–0.18 l/min.)]
236–021 238–231 0.026” (0.660 mm) Light Fluids or Low Fluid Flow
[3–6 oz./min. (0.09–0.18 l/min.)]
236–022 238–232 0.030” (0.762 mm) Light to Medium Fluids or Low Fluid Flow
[5–8 oz./min. (0.15–0.24 l/min.)]