background image

Warnings 

2

311239D

Contents

Warnings   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3

Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6

Repair  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10

Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Schematic Diagram  . . . . . . . . . . . . . . . . . . . . . . . . 12

Technical Data   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Graco Standard Warranty  . . . . . . . . . . . . . . . . . . . 14

Graco Information   . . . . . . . . . . . . . . . . . . . . . . . . . 14

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. Refer 
back to these Warnings. Additional, product-specific warnings may be found throughout the body of this manual 
where applicable.

WARNING

PRESSURIZED EQUIPMENT HAZARD 

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and 
cause serious injury.

Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, 
checking, or servicing equipment. 

Tighten all fluid connections before operating the equipment.

Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

PERSONAL PROTECTIVE EQUIPMENT 

You must wear appropriate protective equipment when operating, servicing, or when in the operating 
area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic 
fumes, burns, and hearing loss. This equipment includes but is not limited to:

Protective eyewear 

Clothing and respirator as recommended by the fluid and solvent manufacturer

Gloves

Hearing protection

EQUIPMENT MISUSE HAZARD 

Misuse can cause death or serious injury.

Do not operate the unit when fatigued or under the influence of drugs or alcohol.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system 
component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all 
equipment manuals. Read fluid and solvent manufacturer’s warnings. For complete information 
about your material, request MSDS forms from distributor or retailer.

Check equipment daily. Repair or replace worn or damaged parts immediately with genuine Graco 
replacement parts only.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your Graco distributor for information.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from work area.

Comply with all applicable safety regulations.

Summary of Contents for NXT011















Reviews: