Installation
311239D
3
Installation
Air Control Modules NXT011 and NXT031 (locking
air regulator) and NXT021 (non-locking air regula-
tor) are available.
1.
Install supplied o-ring (43) into counterbore on upper
side of air control module (D). Fasten module to air
motor (M) with two supplied screws (44). Start
threading screws by hand before using a tool.
Torque to 20 ft-lb (27.1 N•m).
2.
Close bleed-type master air valve (B).
TI8323c
M
43
D
44
Screws are thread-forming. Start threading by hand
before using a tool. Torque to 20 ft-lb (27.1 N•m).
1
1
B
TI8322c
3.
Turn air regulator knob (C) fully counterclockwise.
4.
Hold the 3/4 npt(f) air inlet fitting (A) with a 1-5/16 in.
wrench to prevent it from turning while securely con-
necting the air supply hose.
C
TI8322c
A
TI8235c
