![background image](http://html1.mh-extra.com/html/graco/nxt-m02-series/nxt-m02-series_instructions-parts-manual_2251364013.webp)
Repair
312796B
13
Repair Air Motor
NOTE: Air Motor Seal Kits are available. See page 21
for the correct kit for your motor. Parts included in the kit
are marked with an asterisk (*). For best results, use all
the parts in the kit.
Disconnect the Air Motor
1.
Flush the pump, if possible. (See package manual)
Relieve the pressure. (See page 9.)
2.
Disconnect the air and fluid hoses, the ground wire,
and the tie rod shield.
3.
Hold the flats of the air motor piston rod with a
wrench. Use another wrench to loosen the coupling
nut (CN).
4.
Remove the tie rod nuts (TN).
5.
Use a socket to remove the mounting screws (MS).
6.
Lift up on the air motor to remove it. The tie rods and
drip shield will remain attached.
F
IG
. 9: Coupling nut removal
CN
TN
ti12815a
F
IG
. 10: Air motor removal
Cart Mount: Remove the two screws on the arms
and tip back or remove the air control panel for eas-
ier removal of the air motor.
MS
ti12818a