![background image](http://html1.mh-extra.com/html/graco/milestone-lx/milestone-lx_user-manual_2250816039.webp)
38
縫製品的拆卸方法 Disassembling method for sewing products
〈護頭枕套 Headrest Pad〉
若有需要,可將頭枕靠墊拆下清洗。
If needed, headrest pad may be removed for cleaning.
Ⓐ
需拆下時,請解開護頭枕套上的固定扣,再將肩帶抽出。
To remove, unsnap the pad to pull the harness straps out.
Ⓑ
將位於高度調節鈕附近的塑膠固定片拉出溝槽口。
Pull the plastic tab out of the slots just below the red adjustment handle.
Ⓒ
取下護頭枕兩側勾環的鬆緊帶。
Remove the elastic straps from the hooks on both sides of the headrest.
Ⓓ
將整塊護頭枕套取下。
Pull pad off of headrest.
※安裝時,請依據上述步驟之相反順序操作。
Reverse the steps to reattach the cover on the headrest.
以冷水機洗時,建議放入洗衣袋中,並以低速弱洗程序洗滌。並請平放自然風乾,請勿使
用漂白水。
Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH.
CAUTION
注意
A
B
C
D