Setup
3A0885E
9
Spraying Stains or Clear Coats
(Fine-Finish Optimizer)
The Fine-Finish Optimizer should be installed and used
when spraying thin material such as stain or clear coats.
The Fine-Finish Optimizer restricts the material flow result-
ing in a finer quality finish.
Installation
1.
Remove material cup and suction tube.
2.
Remove the cleaning tool before installing the
Fine-Finish Optimizer into the sprayer.
3.
Push Fine-Finish Optimizer into pump inlet until
completely engaged and re-install suction tube.
Cleanup/Storage
Be sure to remove and clean the Fine-Finish Optimizer
immediately after use. Store the Fine-Finish Optimizer
on the Storage/cleaning Tool supplied to keep the hole
clear of dried material.
NOTICE
Failure to install the Fine-Finish Optimizer when spraying
thin materials will cause the sprayer to pulsate.
ti15440a
ti15473a
ti15480a
Summary of Contents for Magnum Pro Compact A15 258861
Page 25: ...Notes 3A0885E 25 Notes...
Page 26: ...Notes 26 3A0885E Notes...
Page 27: ...Notes 3A0885E 27 Notes...
