GRACO INC. - EAS P.O. Box 1441 MINNEAPOLIS, MN 55440-1441
©
COPYRIGHT 1997 Graco Inc.
INSTRUCTIONS - PARTS LIST
684-027
LINE X
Air Powered
LX2000 SPRAYER
3000 PSI (207 bar) MAXIMUM WORKING PRESSURE
240 Volt, 1 or 3 Phase, 50/60 Hertz
Delivery
7.5 lb/min at 48°F temperature rise
(3.88 Kg/min at 27°C temperature rise)
Power Requirements
Electrical:
240 Volt Maximum
208 Volt Minimum
Single phase:
37 Amps with 315’ (91.4m)
hose
Three phase:
27 Amps with 315’ (91.4m)
hose
Compressed Air:
80-120 psi
(5.6-8.3 bar)
30 CFM (0.84 m³/min)
Model 973-005 includes:
Heater and heated hose controls
President plural component pump
Pump stand
50’ (15m) 3/8” ID heated hose
15’ (4.6m) 1/4” ID heated whip hose
(2) 1:1 55 gallon feed pumps
(1) Helix agitator
WARNING
Reactive Chemical Hazard
Graco Inc. does not manufacture or supply any of the reactive chemical materials that may be used in this
equipment and is not responsible for their effects. Because of the vast number of chemicals that could be
used and their varying chemical reactions, before using this equipment, the buyer and the user should
determine all facts relating to the materials used, including any of the potential hazards involved.
Particular inquiry and investigation should be made into potential dangers relating to toxic fumes, fires,
explosions, reaction times, and exposure of human beings to the individual components or their resultant
mixtures. Graco assumes no responsibility for loss, damage, expense or claims for bodily injury or
property damage, direct or consequential, arising from the use of such chemical components.
This manual contains IMPORTANT
WARNINGS and INSTRUCTIONS
READ AND RETAIN FOR REFERENCE
