Installation
3A1451C
3
Installation
Typical Installations
NOTE: Do not use this dispense valve on non-Graco
consoles. The trigger could be inadvertently pressed
while the dispense valve is stowed.
. 1 shows a typical hose reel installation. Dispense
valves can also be installed on a console as shown in
Fig. 2.
The typical installation shown in Fig. 1 is only a guide. It
is not a complete system design. Contact your Graco
distributor for assistance in designing a system to suit
your needs.
NOTICE
This dispense valve is not designed for in-line installa-
tion. Do not install with a shut-off valve on the outlet
side of the meter which could damage the meter hous-
ing cover.
KEY DESCRIPTION
A
Metered dispense valve
B
Fluid shut–off valve
C
Hose
D
Hose reel fluid inlet hose
E
Hose reel
A Thermal Relief Kit (not shown) is required. The kit
will vary by pump selected. See Parts, page 16 for a
list of available kits.
F
IG
. 1
B
D
E
C
A
ti12081a
