![background image](http://html1.mh-extra.com/html/graco/ispa003aa/ispa003aa_owners-manual_2252934046.webp)
10
3.1 Removing and Attaching Base
3.2 Adjusting Handle
To remove infant restraint, squeeze handle at
back of seat and lift infant restraint from base
as shown
!
.
To put infant restraint in base, push infant
restraint down until it clicks into base. Pull up
on infant restraint to be sure it is latched
firmly into base.
!
1. Press handle adjustment buttons on
both sides of handle
"
.
2. Rotate handle until it clicks into any
of the 5 positions:
Position A: MUST be used
when carrying by handle,
Position B,C,D: are convenience
positions,
Position E: is the sitting position,
NEVER use positions B or C
in the vehicle.
BOTH handle adjustment
buttons must pop out to lock
handle in place
#
.
3. Push and pull on the handle
to be sure it is locked firmly
in position.
"
#
Carrying
Sitting
A
B
C
D
E
Summary of Contents for ISPA003AA
