All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions.
This manual contains English. MM 407070
Graco Headquarters:
Minneapolis
International Offices:
Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revision C, January 2017
Parts
Installation
1. Remove existing hot melt applicator system.
2. Use six screws (1102) and six nuts (1103) to secure
adapter plate (1101) through the existing holes from
the previous system.
3. Align the InvisiPac system with the bolts on the
adapter plate (1101) then place onto the adapter
plate (1101).
4. Use the remaining three nuts (1103) to secure the
InvisiPac system to the adapter plate (1101).
5. Use elbow fitting (1104) to install system air inlet
filter (A, not included with kit).
Graco Information
Sealant and Adhesive Dispensing Equipment
For the latest information about Graco products, visit
www.graco.com
.
For patent information, see
www.graco.com/patents
.
TO PLACE AN ORDER, contact your Graco distributor, go to
www.graco.com
and select
“Where to Buy” in the top blue bar, or call to find the nearest distributor.
If calling from the US:
800-746-1334
If calling from outside the US:
0-1-330-966-3000
1101
1102
1103
ti21918a
A
C
B
Bolt Hole Dimensions
A
9.8 in. (249 mm)
B
14.843-15.157 in.
(377.0-385.0 mm)
C
17.003-17.317 in.
(431.9-439.9 mm)
D
23.0 in. (584.2 mm)
E
13.0 in. (330.2 mm)
Plate Extension
Dimensions
F
0.99 in. (25.1 mm)
G
0.58 in. (14.7 mm)
H
1.58 in. (40.1 mm)
J
3.36 in. (85.3 mm)
1104
A
D
E
F
G
J
H
Ref
Part
Description
Qty
1101
---
PLATE, adapter
1
1102
112395 SCREW flange head cap
6
1103
112958 NUT, hex, flanged
9
1104
121283 FITTING, elbow, 45 degree
1
