309495L
EN
Operation, Parts
Inline HD
™
Texture Gun
For portable spraying of water-based materials. Can be used for application of
solvent-based materials only when solvent compatible seals are installed and solvent
compatible, conductive hoses are used. For professional use only.
Not approved for use in European explosive atmosphere locations.
Model: 245820 (Series C)
4000 psi (28 MPa, 280 bar) Maximum Working Pressure
Ball and valve needle – abrasive material compatible
Model: 17Y907
1000 psi (6.9 MPa, 69 bar) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual and the sprayer manual before using the
equipment. Refer to your sprayer instruction manual for Pressure Relief, priming and spray
instructions. Save these instructions.
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pressure Relief Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Related Manuals:
3A6748
Operation, Repair, Parts