Graco Hydra-Spray 224-621, Instructions-Parts List Manual

Page: 16 / 20

16 306-787
Accessories
Straight Swivel 204–940
3000 psi (210 bar) Maximum Working Pressure
1/4 npt(m) x 1/4 npsm(f)
High Pressure Flo Gun 207–945
6000 psi (415 bar) Maximum Working Pressure
See 307–004.
Straight Swivel 207–947
6000 psi (415 bar) Maximum Working Pressure
1/2 npt(m) x 1/2 npt(f)
Zee Swivel 207–948
6000 psi (415 bar) Maximum Working Pressure
1/2 npt(m) x 1/2 npt(f)
Stainless Steel Filter Screens
For 214–624 Surge Tank.
167–024
30 mesh (595 micron)
167–025 60 mesh (250 micron)
167–026 100 mesh (149 micron)
167–027 200 mesh (74 micron)
Director Valve 214–711
5000 psi (350 bar) Maximum Working Pressure
1/4 npt(m) x 1/4 npt(m) x 1/4 npt(m)
Elbow 100–840
To direct flow from drain valve in a safe direction.
1/4 npt(f) x 1/4 npt(m)
Reducer Bushings
To connect director valve 214–711 to the outlets of the
surge tank.
100–176 3/8 npt(m) x 1/4 npt(f)
100–206 1/2 npt(m) x 1/4 npt(f)
For Two Gun Systems
Each line in a two gun system must have a shutoff
valve to relieve fluid pressure if the fluid line becomes
clogged, and to isolate one gun for servicing while the
other is in operation. Director valve 214–711 is recom-
mended for both purposes. Use elbow 100–840 to di-
rect the outlet flow from the drain valve in a safe direc-
tion to a waste container. Use reducer bushings
100–176 and 100–206 to connect the valve to the out-
lets of surge tank 214–624.
In the draining mode, the valve handle is turned away
from the elbow (marked DRAIN on the valve housing);
in the operating mode, the handle is turned toward the
elbow (marked CIRC on the housing).
0994
Drain
Line
To Gun
From
Filter
DRAIN
(stamped on housing)
CIRC
(stamped on housing)
Line
To Gun
Elbow
Surge Tank With
Fluid Filter
Hose
To Gun
Two Gun Hookup
Draining Mode Operating Mode
0987
Director Valve
(shown in
operating mode)