![background image](http://html.mh-extra.com/html/graco/hvlp/hvlp_instructions-parts-list-manual_2250885008.webp)
7934A
Fig. 4
C
D
D
2
1
/
2
-gallon remote pressure pot
2-quart remote pressure pot
F
J
J
G
G
A
B
L
E
cup setup for spray gun
Z
Z
H
H
cup-over option
See manual
309205
F
K
K
Y
X
Y
Z
X
remote pressure pot setup for
spray gun
A
G
C
E
X
Y
8 309241
Setup
Connect Fluid and Air Supply
See Fig. 4
D
The HVLP compressor/cart provides the air supply
for remote pressure pots.
D
The circled letters in Fig. 4 indicate hose line con-
nections.
1.
Connect gun air supply hose (A) between turbine
air outlet (B) and gun air inlet (C). DO NOT use
wrench to tighten connections; hand tighten only.
NOTE:
The 4900 turbine uses a quick connector
at the air outlet (B). A wrench is not required to
connect the air hose (A).
2.
If using spray gun cup (D):
Connect cup to gun fluid inlet (E).
If using accessory remote pressure pot (F):
Connect fluid supply hose (G) between remote
pressure pot fluid outlet (H) and gun fluid inlet (E).
Connect pressure pot air hose (J) between pres-
sure pot air regulator inlet (K) and cart compressor
air outlet (L).
Connect to Electric Supply
See
Turbine Sprayer
in Fig. 3 on page 7.