Graco Husky 715, Instructions Manual

Page: 26 / 36

26 308-444
Pump Matrix
Husky 715 Acetal and Polypropylene Pumps, Series E
Your Model No. is marked on the pump’s serial plate. To determine the Model No. of your pump from the following
matrix, select the six digits which describe your pump, working from left to right. The first digit is always D,
designating Husky diaphragm pumps. The remaining five digits define the materials of construction. For example, a
pump with a Husky 715 aluminum air motor, acetal fluid section, acetal seats, PTFE balls, and PTFE diaphragms is
Model
D 6 1 – 2 1 1.
To order replacement parts, refer to the part lists on pages 28 to 31. The digits in the matrix
do not correspond to the ref. nos. in the parts drawing and lists.
Diaphragm
Pump
Air Motor Fluid Section – Guides Balls Diaphragms
D (for all pumps) 6 (Husky 715;
Aluminum) 1 (acetal) – 1 (not used) 1 (PTFE) 1 (PTFE)
2 (polypropylene) – 2 (acetal) 2 (not used) 2 (not used)
3 (aluminum) see
manual 308–445) – 3 (316 sst) 3 (316 sst) 3 (not used)
4 (sst) see
manual 308–445) – 4 (not used) 4 (not used) 4 (not used)
A (acetal BSPT) – 5 (not used) 5 (Hytrel ) 5 (Hytrel )
B (polypropylene
BSPT)
– 6 (not used) 6 (Santoprene ) 6 (Santoprene )
C (aluminum
BSPT) see
manual 308–445
– 7 (not used) 7 (buna-N) 7 (buna-N)
D (sst BSPT) see
manual 308–445 – 8 (not used) 8 (Viton ) 8 (Viton )
– 9 (polypropylene) 9 (not used) 9 (not used)
– A (not used) A (not used) A (not used)
– B (not used) B (not used) B (not used)