Graco GX21 Cordless, Operation, Parts

Page: 23 / 48

Cleanup
3A8429A 23
Cleanup
Cleaning the sprayer after each use results in
a trouble free start up the next time the
sprayer is used.
•
For long term storage refer to Storage ,
page 28.
•
See Cleaning Fluid Compatibility ,
page 30 and Quick Reference , page
31.
1. When using oil-based or flammable
material, follow Grounding
Instructions , page 9.
2. Perform Pressure Relief Procedure ,
page 13.
3. Remove tip guard and spray tip.
4. Remove suction tube and drain tube
from paint, wipe excess paint off out-
side.
5. Separate drain tube (smaller) from suc-
tion tube (larger).
6. Place empty waste and flushing fluid
pails side by side.
7. Place suction tube in flushing fluid. See
Cleaning Fluid Compatibility , page
30, for appropriate flushing fluid to use.
Place drain tube in waste pail.
To avoid serious injury from fire and
explosion when using oil-based or flammable
materials:
•
Do not spray solvents through the spray
tip. Always remove tip guard and spray tip
before flushing. Clean tip guard and spray
tip in a bucket of compatible solvent.
•
Clean in a well-ventilated area. Keep a
good supply of fresh air moving through
the area.
•
When flushing with solvents, always
ground the sprayer and waste container.
ti25197a
ti27495a