Graco GL-32, Instructions For Use Manual

Page: 5 / 8

Technical Data
313798S 5
Technical Data
Oil Models
Grease Models
*Only use fluids appropriate for your application, automatic dispensing and the equipment’s operating temperature.
Consult with machine and lube manufacturer for details.
15

SPACER, manifold inlet 2
16 15W658 CLIP, manifold (all non-SST models
only, 24A921-24A924, 24F509-24F512;
24E241-24E244; 24Z542, 24Z544,
24F544, 24F545, 24F546, 24F548.
24W916, 24W917) 2
124619 CLIP, SST, manifold (models,
24E391-24E394; 24F551-24F554)
17 123962 SEAL, square, GL-Series 1
‡ 131252 SEAL, square, GL-Series (for low tem-
perature applications) 1

Parts included in Injector Repair Kit 24B360,
Oil - 24F201; SST - 24F944

Parts included in 1/8” Outlet Fitting Kit 24B677;
SST - 24F943
† Parts included in 4 mm Outlet Fitting
(Adapter) Kit 24F513; SST- 24F555

Parts included in 6 mm Outlet Fitting Kit 24F514; SST-
24F556
‡ Parts included in Indicator Pin Kit 25C066 for low tem-
perature applications.
Ref. Part No. Description Qty
Maximum Operating Pressure 1000 psi (6.89 MPa, 68.9 bar)
Minimum Operating Pressure 750 psi (5.17 MPa, 51.7 bar)
Suggested Operating Pressure 850 psi (5.86 MPa, 58.6 bar)
Reset Pressure 150 psi (1.03 MPa, 10.3 bar)
Output Volume per Cycle
adjustable: 0.001 - 0.008 in.
3
(0.016 - 0.131 cc)
Wetted Parts carbon steel, stainless steel, copper, fluoroelastomer
Recommended Fluids Minimum SAE 10 weight oil*
Maximum Operating Pressure 3500 psi (24 MPa, 241 bar)
Minimum Operating Pressure 1200 psi (8.3 MPa, 83 bar)
Suggested Operating Pressure 2500 psi (17 MPa, 172 bar)
Reset Pressure 200 psi (1.4 MPa, 14 bar)
Output Volume per Cycle
adjustable: 0.001 - 0.008 in.
3
(0.016 - 0.131 cc)
Wetted Parts carbon steel, stainless steel, copper, fluoroelastomer,
TPU
Recommended Fluids Grease N.L.G.I. grades #000 - #2*