Run
Run
Run Screens
Screens
Screens
When in Run Mode, the Informer displays the current
flow rate and batch total on Screen 1. Screen 2
displays the grand total for the flow meter to which it
is connected. Screens 3–6 display a log of the last
20 alarms.
Run
Run
Run Screen
Screen
Screen 1
1
1
Use this screen to view the current batch total and
flow rate, or to reset the batch totalizer to 0. Units are
set on Setup Screen 1 and Setup Screen 2.
Figure 2 Run Screen 1
Key
Key
Key
Enter the screen.
Batch Totalizer - Displays the amount
of fluid measured since the last time the
field was reset to zero.
Flow Rate - Displays the current flow
rate.
Reset Batch Totalizer - resets the batch
totalizer to zero.
Move between Run Screens.
Run
Run
Run Screen
Screen
Screen 2
2
2
Use this screen to view the grand total flow for the
system. The grand total cannot be reset.
Figure 3 Run Screen 2
Key
Key
Key
Grand Totalizer - Displays the grand
total flow for the system. This value
cannot be reset.
Move between Run Screens.
3A2040H
23
