Cleanup
14
332255A
10. Raise siphon tube above flushing fluid and run
sprayer for 15 to 30 seconds to drain fluid. Turn
power
OFF
11. Close drain valve. Trigger gun into flushing pail to
purge fluid from hose.
12. Open prime valve.
13. Remove filters from gun and sprayer, if installed.
Clean and inspect. Install filters.
14. If flushing with water, flush again with mineral spir-
its, or Pump Armor, to leave a protective coating to
prevent freezing or corrosion.
15. Wipe sprayer, hose and gun with a rag soaked in
water or mineral spirits.
ti2707a
PAINT
FLUSH
ti2820a
ti2712a
WASTE
ti2713a
ti2719a
ti2814a
Pump Armor
ti2895a
ti2776a
