Installation
10
Installation and Operation
16-Gallon (60 Liter) Drum Cover Pump
Fire-Ball 225 Model 246904
Fire-Ball 300 Model 225094
1.
Set the cover (4) on a 16-gallon (60 liter) drum and
secure with the thumbscrews (Q). See F
. 5.
2.
For 246904 cut the extension tube (P) at a 45° angle
to a length appropriate for the size of the drum.
When installed, the bottom of the angle should be
about 1” (25 mm) from the bottom of the drum. The
down tube for 225094 is sized for the container.
3.
Install the pump (F) on the cover (4) with the screws
(R), washers and nuts (S) supplied.
4.
Assemble the air regulator kit (items 3a-3d) to the
pump air inlet (D) as shown. Use thread sealant and
tighten all parts securely.
5.
Apply thread sealant to the male threads of the 3/8
npt swivel union (2d). Screw the union into the
bleed-type master air valve (3c).
6.
Apply thread sealant to the male threads of the 1/2
npt swivel union (2b). Screw the union into the pump
fluid outlet (N).
7.
Connect the 1/2 npt(mbe) fluid hose (2a) to the
swivel union (2b).
8.
Connect the 3/8 npt(mbe) air hose (2c) to the swivel
union (2d).
F
IG
. 5
2b
2a
2d
2c
F
3d
3b
3d
3c
4
Q
3a
D
R
A
N
P
S
