background image

Setup 

2

313440E

Setup

CompPack Installation

For references (1) - (99), see 

Parts

, manual 313406. For 

reference numbers(101) - (199) see 

Parts

, page 7.

1.

Turn off and unplug sprayer.

2.

Loosen four screws (18), remove hose wrap (35), fil
ter retainer (17), pre-filter (20) and main filter (21).

3.

Install CompPack (A) on sprayer.

4.

Install main filter (21), pre-filter (20), filter retainer (17) 
and hose wrap (35) with four screws (105).

Spray Gun with Optional Remote Cup

The optional remote cup comes with two hoses.

1.

Connect the short hoses to their matching long 
sprayer hoses.

2.

Convert spray gun from siphon cup operation to 
remote cup operation. See 

Convert Gun from 

Siphon Cup to Optional Remote Cup.

3.

Connect air hose (A) to sprayer. 
Hand tighten. Do not connect 
whip hose direct to sprayer. 
Connect whip hose to gun end of 
hose only. 

4.

Connect air hose (A) from 
sprayer to inlet fitting of spray gun.

5.

Connect air hose (B) between 
CompPack outlet and remote cup 
air inlet.

18

17

20

21

ti13061a

35

A

105

17

20

21

35

ti12857a

ti12798a

A

B

C

ti13082a

ti12797a

Summary of Contents for FinishPro CompPack Series









Reviews: