Technical Specifications
3A6586D
43
Technical Specifications
E-Flo SP Electric Pumps
US
Metric
Driver Thrust
4,840 lbs
21.5 kN, 2.2 kg
Stroke length
4.75 in.
120.7 mm
Maximum fluid operating temperature
180° F
82.3° C
Maximum driver cycle rate
25 cycles per minute
Driver line voltage rating
200-240 VAC, single phase, 50/60 Hz
Driver peak input amerpage
20 A per phase @ full load*
Input current
20 A maximum
Sound pressure
<77 dBa**
Fluid Outlet Size - all pump materials
Check-Mate 100, 200, 250
1 in. NPT, female
Check-Mate 500
1-1/2 in. NPT, female
Dura-Flow 115, 145, 180, 220, 290
1 in. NPT, female
Dura-Flow 430
1-1/2 in. NPT, female
Maximum Fluid Working Pressure
100cc Check-Mate - All
6000 psi
414 bar, 41.4 MPa
200cc Check-Mate - All
4200 psi
290 bar, 29.0 MPa
250cc Check-Mate - All
3400 psi
234 bar, 23.4 MPa
500cc Check-Mate - All
1600 psi
110 bar, 11.0 MPa
145cc Dura-Flo - SS
5600 psi
386 bar, 38.6 MPa
180cc Dura-Flo - SS
4500 psi
310 bar, 31.0 MPa
220cc Dura-Flo - SS
3700 psi
255 bar, 25.5 MPa
290cc Dura-Flo - SS
2800 psi
193 bar, 19.3 MPa
430cc Dura-Flo - SS
1900 psi
131 bar, 13.1 MPa
115cc Dura-Flo - CS
6000 psi
414 bar, 41.4 MPa
145cc Dura-Flo - CS
5600 psi
386 bar, 38.6 MPa
180cc Dura-Flo - CS
4500 psi
310 bar, 31.0 MPa
220cc Dura-Flo - CS
3700 psi
255 bar, 25.5 MPa
290cc Dura-Flo - CS
2800 psi
193 bar, 19.3 MPa
Motor Oil
Specification
Graco part no. 16W645, ISO220 silicone-free synthetic EP
gear oil***
Capacity
1.5 quarts
1.4 liters
Notes
* Full load amps with all devices operating at maximum capabilities.
** Measured per EN ISO 11202:2010.
*** The driver gearbox is shipped from the factory pre-filled with oil. Additional oil must be purchased sepa-
rately.