Setup
Setup
Setup Screen
Screen
Screen 17
17
17
Use this screen to set up the input scaling (radar level
sensor) for 4–20mA devices and turn on the current
loop (Port 8 and Port 9 of the ADCM).
Figure 24 Setup Screen 17
Setup
Setup
Setup Screen
Screen
Screen 17
17
17 Key
Key
Key
Monitor the back pressure regulator mA
output.
Set the value for P9 (Port 9) between 4
and 20.
Select this box to turn on the 4-20mA
supply. Set the numerical values for the
scaling ceiling for 4-20mA signal.
Setup
Setup
Setup Screen
Screen
Screen 18
18
18
This screen is for enabling a modbus communications
alarm and disabling the Stop Pump function of the
Cancel key.
Figure 25 Setup Screen 18
Setup
Setup
Setup Screen
Screen
Screen 16
16
16 Key
Key
Key
Select the modbus alarm type:
None
Deviation
Alarm
Select this box to make CAN
communication a deviation that
does not shut down the pump.
Select this box to disable the Stop Pump
function of the Reset/Cancel key.
Enable or disable the backlight and set
the time-out valve in minutes.
20
3A2527H
