3A3956D
EN
Instructions
Dyna-Star
®
HP
Pump System
Provides lubricant flow and pressure to operate a single line parallel automatic lubrication
system. For automatic lubrication systems only.
Not approved for use in European explosive atmosphere locations.
Models
77X202 - MODULE, EDS, HP, AFSO, LL, 60 lb
77X203 - MODULE, EDS, HP, AFSO, LL, 90 lb
77X402 - MODULE, EDS, HP, SP, AFSO, LL, 60 lb
77X403 - MODULE, EDS, HP, SP, AFSO, LL, 90 lb
24VDC, Injector module with pump, tube-in-tube, vent valve,
auto-fill shutoff, low level, 60 lb. or 90 lb. reservoir.
3500 psi (24.1 MPa, 241 bar) Maximum Working Pressure
5000 psi (34 MPa, 344.7 bar) Maximum Refilling Inlet Pres-
sure
Related Manuals
Important Safety Instructions
Read all warnings and instructions in this
manual, the Dyna-Star HP and HF Pump
instruction manual and all related component
manuals (listed below). Save all instructions.
Manual
Description
332514
Dyna-Star HP and HF Pump
332518
Dyna-Star HP and HF Auto-Fill Shut
Off Kit
332519
Dyna-Star HP Vent Valve Kit
333393
Fill Valve
334998
Power Cable Kit
334999
Cable Harness Kit
3A2960
GLC2200 Lubrication Controller
Summary of Contents for Dyna-Star HP 77X202
Page 25: ...Notes 3A3956D 25 Notes...
