![background image](http://html1.mh-extra.com/html/graco/dyna-star-77x540/dyna-star-77x540_instructions-manual_2251113005.webp)
Parts
332519J
5
Parts
Accessories
Technical Data
.
*
Dyna-Star HP Pump Models are rated for 5000 psi (34.47 MPa, 344 bar) maximum working pressure, however, when a vent valve is installed on
the HP Pump, the maximum working pressure must be reduced to 3500 psi (24.1 MPa, 241 bar).
**Flow capability depends on viscosity, type of fluid, temperature, etc.
California Proposition 65
Ref Description
Qty
1
MANIFOLD, electric vent valve
1
2
VALVE, cartridge, 24VDC
1
3
VALVE, pressure relief, 3500 psi
1
4
SCREW, cap, socket, M8 x 1.25
3
8
O-RING
2
9
PLUG, pipe, 1/8 in. npt
1
10 PLUG, 1/4 in. npt
1
Part No. Description
24N402 CABLE, 6 ft, vent valve, 2 pin for vent valve
control
77X546 CABLE, power extension, 15 ft (4.6m), Injec
-
tor System
1
2
8
4
3
9
10
Vent Valve for Dyna-Star HP
US
Metric
Maximum working pressure*
3500 psi
24.1 MPa, 241 bar
Inlet/Outlet Sizes
Outlet (marked “0”)
3/8 in. npt(f)
Inlet (refill - marked “1”)
3/8 in. npt(f)
Pressure Relief Valve
Factory Set Pressure
4000 psi + 250 psi
27 MPa, 275 bar + 10%
Reset Pressure
80% of set pressure
Relief Rate**
0.1 gallons/minute @3500 psi
0.4 liters/minute @24.1 MPa. 241 bar
Solenoid Valve
Flow**
Up to gpm 0.2 gallons/minute,
40 in
3
/minute
0.65 liters/minute
Wetted materials
Zinc plated steel, carbon steel, aluminum, fluoroelastomer, polyurethane
Weight
4.0 lbs
1.8 kg
IP Rating
IP69K
Solenoid Coil
Resistance (DC) (Ohms) @ 68°F (20°C) Initial Current Draw (Amps)
24 VDC
28.8
0.83
CALIFORNIA RESIDENTS
WARNING:
Cancer and reproductive harm – www.P65warnings.ca.gov.