![background image](http://html1.mh-extra.com/html/graco/duologic2/duologic2_installation-manual_2250792005.webp)
16
CarSeat.se
19. Extend support leg before placing base
on seat. If DuoLogic is installed in front seat,
make sure vehicle seat back is completely
upright.
20. Place base in desired location. To make
installation easier, temporarily slide front
seat(s) all the way forward.
23. Thread lap portion of seat belt through
blue clips on both sides.
24. Open clip (A) and thread chest portion
of seat belt through blue clip (B), through
clip underneath front of base (A), and through
blue clip (C).
21. Make sure blue arrows at bottom of base
are pointing against each other (A). Lift red
lock (B) to adjust forward or backwards (C).
22. Fasten seat belt in its regular buckle. Pull
lap portion of seat belt behind black frame.
25. Push down on base and tighten at same
time chest portion of seat belt thoroughly.
Make sure seat belt is holding base firmly
in place. Lock clip and carefully check it's
securely locked.
26. Adjust height of support leg by pulling
red knob. Make sure support leg is solid
against vehicle floor. Support leg should
be adjusted so base is resting on vehicle seat.
Now, continue installing seat on page 19.
INSTALLATION MANUAL
INSTALLATION MANUAL
Lap and diagonal belt
Lap and diagonal belt