Installation
334222B
9
Connect Power to the
Monitoring Controls (Optional)
DataTrak
1. Connect the AC adapter to the black labeled con-
nector on the D-Sub harness.
2. Plug the AC adapter into a 100-240V, 50-60 Hz
power source.
Customer Provided PLC Machine
Monitoring Kit
1. Using 22 gauge wire or smaller, connect the cus-
tomer provided 24+ VDC power source and signals
to the terminals.
NOTE:
The low level sensor sends a high signal when
activated. Refer to
, page 24.
Module
Terminal No.
Customer
Required Con-
nection
Function
+
24+ VDC
Supply 24+ VDC
power to components
+
+
-
VDC Common
Low level sensor
common
P1
VDC Common
with indicator
(LED)
Low level sensor acti-
vated signal
P2
Cycle counter - Up
P3
Cycle counter - Down
P4
VDC Common
with normally
open switch
Activate power valve
