![background image](http://html1.mh-extra.com/html/graco/car-booster-seat/car-booster-seat_owners-manual_2250769021.webp)
21
8.6 To Install Locking Clip
1. Tighten the buckled belt by pushing down hard on the child restraint and pulling hard on the
shoulder belt.
:KLOHSXVKLQJGRZQRQVHDWSLQFKWKHWZRVWUDSVWRJHWKHUEHKLQGWKHEXFNOHWRQJXH8QEXFNOH
the belt without allowing it to slip.
3. Attach locking clip to lap and shoulder belts as shown
.
4. Rebuckle belt. Check that lap belt does not move
E\SXOOLQJKDUG,IEHOWORRVHQVRUOHQJWKHQVUHSHDW
procedure.
Remove locking clip when not using child restraint. Store
under it’s tab on the rear of seat.
Test installation to see if child restraint is secure.
,IQRWVHFXUHDGGLWLRQDOEHOWWLJKWHQLQJPD\EHUHTXLUHG
8QEXFNOHYHKLFOHVHDWEHOW
+ROGEHOWVWRJHWKHUDQGUHPRYHORFNLQJFOLS
6KRUWHQOHQJWKRIODSEHOWSRUWLRQVOLJKWO\E\SXOOLQJEHOW
through latch plate. Re-attach locking clip.
%XFNOHYHKLFOHVHDWEHOW3UHVVFKLOGUHVWUDLQWIXUWKHUGRZQ
into vehicle seat cushion to help buckle vehicle seat belt. Test
LQVWDOODWLRQWRVHHLIFKLOGUHVWUDLQWLVVHFXUH,IQRWVHFXUH
repeat above steps until secure.
1
2” (1.25 cm)
Summary of Contents for Car Booster Seat
