![background image](http://html1.mh-extra.com/html/graco/c27130/c27130_instructions-parts-list-manual_2251529002.webp)
Warnings
2
310547C
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When
these symbols appear in the body of this manual or on warning labels, refer back to these Warnings. Product-specific
hazard symbols and warnings not covered in this section may appear throughout the body of this manual where
applicable.
WARNING
WARNING
WARNING
WARNING
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result in
serious injury.
• This equipment is for professional use only.
• Read all instruction manuals, warnings, tags, and labels before operating the equipment.
• Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
• Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
• Check the equipment daily. Repair or replace worn or damaged parts immediately.
• Do not exceed 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure to the gun.
• Do not exceed the 2400 psi (17 MPa, 165 bar) Maximum Fluid Working Pressure of the gun.
• Do not exceed the maximum working pressure of any component or accessory used in the system.
• Route the hoses away from the traffic areas, sharp edges, moving parts, and hot surfaces. Do not
expose Graco hoses to temperatures above 82° C (180° F) or below -40° C (-40° F).
• Do not use the hoses to pull the equipment.
• Use fluids and solvents that are chemically compatible with the equipment wetted parts. See the
Technical Data sections of all the equipment manuals. Always read the material manufacturer’s
literature before using fluid or solvent in this equipment.
• Always wear protective eyewear, gloves, clothing, and respirator as recommended by the fluid and
solvent manufacturers.
• Comply with all applicable local, state and national fire, electrical and other safety regulations.
• Never use 1,1,1--trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or
fluids containing such solvents in this equipment. Such use could result in a serious chemical
reaction, with the possibility of explosion, which could cause death, serious injury, and/or substantial
property damage.