Graco 571032 Instructions Download Page 3

Page: 3 / 4

3A0528E

5-Wire CPC Power Cable

1. Power up G3 and enter

Setup Mode by pressing
both the UP and DOWN
ARROW buttons together
for 3 seconds.

2. Button will flash green.

3. Press Reset button exit test.

Testing Manual Run

Press remote run button and verify light turns green and
unit has entered the lube cycle.

Validating Color Function

Tri-Color

Remote

Illumination

Standard

Remote

Illumination

Unit in OFF Mode

Off

Unit in ON Mode

Green

Warning Condition

Yellow

Toggles On and
Off once per
second

Fault Condition

Red

Toggles On and
Off once per
second

Summary of Contents for 571032

Page 1: ...Kits rated IP65 Parts Included in Kits Important Safety Instructions Read all warnings and instructions in this manual and the G3 Pump instruction manual included with your unit Save these instruction...

Page 2: ...trip approximately 1 of harness jacket and 1 4 of conductor back Install quick connectors 2 to wires 4 using a crimp connector 7 Insert end of wires 4 from the back side of panel or plate through lock...

Page 3: ...button exit test Testing Manual Run Press remote run button and verify light turns green and unit has entered the lube cycle Validating Color Function Tri Color Remote Illumination Standard Remote Ill...

Page 4: ...Headquarters Minneapolis International Offices Belgium China Japan Korea GRACO INC P O BOX 1441 MINNEAPOLIS MN 55440 1441 Copyright 2010 Graco Inc is registered to ISO 9001 www graco com 6 2010 revise...