Graco 3A4442B, Operation Manual

Page: 12 / 52

Setup
12 3A4442B
9. Turn prime valve down to DRAIN
position.
10. Add flushing fluid to the hopper.
11. Turn ON/OFF switch to the ON position.
12. Turn prime valve horizontal. Disengage
trigger lock.
13. Hold a metal part of the gun firmly to a
grounded metal pail. Trigger gun and
flush until clean.
14. Turn ON/OFF switch to the OFF
position.
15. Engage trigger lock.
16. Sprayer is now ready to startup and
spray.
Bag Roller (Optional)
Assemble roller assembly to the sprayer:
•
Secure bag roller mounting frame to
sprayer.
•
Place roller assembly on the mounting
frame.
•
On the APX 6200 model position the bag
roller assembly in the lower position.
•
On the APX 8200 model position the bag
roller assembly in the upper position.
•
Place bag roller on top of the sprayer and
secure with hardware provided.
•
The bag roller length is adjustable to
accommodate various material bag
lengths. Adjust by loosening the two
handle screws and sliding the extension
in or out.
•
Increase bag roller tension by adjusting
the tension on the two screws.
Bag roller handle can be removed to avoid
damage when transporting sprayer.
NOTE: New sprayers are shipped with
storage fluid that must be flushed out prior
to using the sprayer.
Check flushing fluid for compatibility with
material that is to be sprayed. A secondary
flush with a compatible fluid may be
necessary. Use water for water-based
materials.
ti29977a
ti29978a
ti29979a