Maintenance
333586E
45
Reinstall Platen Wipers
NOTE:
Five gallon Platens have a single Wiper that
must be reinstalled, and 55 gallon Platens have a top
and bottom Wiper that must be reinstalled.
1. Using a wooden or plastic tool to prevent damage to
the Wiper (EB), clean all material from the seal
grooves.
2.
Working from the bottom
, angle one Wiper (EB)
over the back of the Platen (AD). See F
3. Insert the Wiper (EB) in the top groove and run the
front of the Wiper into the groove.
4. If using a 55 gallon Platen, insert the second Wiper
(EB) in the lower groove and run the front of the
Wiper into the groove.
5. Lubricate the outside of the Wiper with lubricant
compatible with the material being pumped. Check
with the material supplier.
Recycling and Disposal
End of Product Life
At the end of the product’s useful life, dismantle and
recycle it in a responsible manner.
•
Perform the
Pressure Relief Procedure
.
•
Drain and dispose of fluids according to applicable
regulations. Refer to the material manufacturer’s
Safety Data Sheet.
•
Remove motors, batteries, circuit boards, LCDs
(liquid crystal displays), and other electronic
components. Recycle according to applicable
regulations.
•
Do not dispose of batteries or electronic
components with household or commercial waste.
•
Deliver remaining product to a recycling facility.
F
IG
. 42
TI10614A
EB
55 Gallon Platen
5 Gallon Platen
EB
Summary of Contents for 333586E
Page 96: ...Wiring Diagrams 96 333586E Wiring Diagrams...
Page 97: ...Wiring Diagrams 333586E 97...
Page 98: ...Wiring Diagrams 98 333586E...
Page 99: ...Wiring Diagrams 333586E 99...
