![background image](http://html.mh-extra.com/html/graco/309455c/309455c_instructions-parts-list-manual_2251670010.webp)
Operation
10
309455C
Testing the Smart Handle's ES
HI/LO Setting
NOTE:
To test a Pro Xp gun smart handle, drill out the
gun air valve shaft hole (H) to 1/4 in. diameter. See
Detail A of F
IG
. 7.
1.
Use the ES HI/LO switch on the back of the gun to
change the power supply output to either high volt-
age or low voltage setting. See Detail A of F
IG
. 7.
2.
Connect the flexible circuit test adapter (20) to the
flex circuit (S) on the power supply cartridge (P).
Thread the connected circuits through the side win-
dow (M) of the fixture and connect to the smart han-
dle.
NOTE:
To ensure the correct pin connections, make
sure there are no twists in the flexible cables.
3.
Mount the smart handle (T) loosely to the fixture.
See Detail B.
4.
Tighten the smart handle screws (U) to the fixture.
See Detail C.
Fig. 7. Testing the Smart Handle
TI1883A
TI1885A
TI1883A
Detail A: Connect the flexible circuit adapter.
Detail B: Install the smart handle loosely.
Detail C: Tighten the smart handle to the fixture.
ES HI/LO Switch
20
M
S
P
T
U
H
1
To test a Pro Xp gun smart handle,
drill out the gun air valve shaft hole
(H) to 1/4 in. diameter.
1
Summary of Contents for 309455C
Page 11: ...Operation 309455C 11 ...