![background image](http://html1.mh-extra.com/html/graco/2k-ultra-lite-249591/2k-ultra-lite-249591_instructions-parts-list-manual_2251079015.webp)
15
309000
Maintenance
Daily Shut-down
When you are through using the 2K-UL valve, the
outlet to the mixer should be cleaned and protected
from drying or crystallization.
WARNING
TOXIC FLUID HAZARD
Hazardous fluid or toxic fumes can cause serious
injury or death if splashed in the eyes or on the
Skin, inhaled, or swallowed.
Read TOXIC FLUID HAZARD on page 5.
1.
Remove and properly dispose of the mixer tube.
NOTE: If using the wide ratio valve, remove and clean
the dispersing tip on the outlet nozzle.
2.
Dispense a shot of material into a waste container
to clear any cross-over in the nosepiece.
3.
Partially fill a plastic disposable night cap (Part No.
551327) with a moisture free oil (217374 pint) or
grease (106565, 14.6 oz. cartridge).
4.
Push the plastic cap over the valve outlet to pro-
tect it from air and moisture.
Preventative Maintenance
There is a grease filled secondary seal/bearing area on
each valve shaft. Every 10,000 cycles, or twice each
month, new grease should be flushed across this area.
Each valve has two flush grease fittings. A small
grease gun is provided with each valve.
To grease the valve:
1.
Remove the grease fitting from one side of the
gun.
2.
Pump grease (Part No. 115982) across the valve
until grease comes out of the other side.
NOTE: For valve 249591 only, use grease 117773.
3.
Reinstall the outlet grease fitting.
Summary of Contents for 2K Ultra-Lite 249591
Page 31: ...31 309000 Dimensions...