![background image](http://html1.mh-extra.com/html/graco/26r310/26r310_repair-and-parts-manual_2251516036.webp)
Repair
36
3A8501A
Replace Over-Temperature
Switch
on page 20.
2. Wait for the heaters to cool.
3. Remove the lower covers (57, 58).
4. Disconnect over-temperature switches (214) from
cable (49). Test across the spade terminals with an
ohmmeter.
a. If the resistance is not approximately 0 ohms,
the over-temperature switch needs to be
replaced. Proceed to step 5.
b. If the resistance is approximately 0 ohms,
inspect cable (49) to make sure it is not cut or
open. Reconnect the over-temperature switch
(214) and cable (49). Disconnect the cable from
the TCM. Test from pin 1 to pin 2 and pin 3 to
pin 4. See
on page 69.
If resistance is not approximately 0 and
switches are 0, replace the original cable with a
new one.
5. If the over-temperature switch fails the test, remove
screws and discard the failed switch. Apply a thin
layer of thermal compound 110009, then install a
new switch in the same location on housing (201).
Secure with screws (215) and reconnect the cables.
ti41093a
58
57
24
Summary of Contents for 26R310
Page 13: ...Notes 3A8501A 13 Notes ...
Page 49: ...Notes 3A8501A 49 Notes ...
Page 66: ...Parts 66 3A8501A ti39929a ...